Differences

This shows you the differences between two versions of the page.

--- nmea2000 [2024/12/24 11:21] – [Step 8: Connect MacArthur HAT and NMEA 2000] admin
+++ nmea2000 [2024/12/25 01:22] (current) – [Installing and Configuring MacArthur HAT on Raspberry Pi with NMEA 2000 and Signal K] admin
@@ Line 1: / Line 1: @@
-====== Installing and Configuring MacArthur HAT on Raspberry Pi with NMEA 2000 and Signal K ======
+{{:firefly_20241118061720.png?200|}}====== Installing and Configuring MacArthur HAT on Raspberry Pi with NMEA 2000 and Signal K ======
+The MacArthur HAT (Hardware Attached on Top) is a specialized expansion board designed for the Raspberry Pi, primarily used in marine and outdoor applications. It integrates various sensors, including GPS, 9-axis IMU (accelerometer, gyroscope, and magnetometer), barometer, and temperature sensors. This HAT enables the Raspberry Pi to collect comprehensive environmental and navigational data, making it ideal for marine electronics projects, weather stations, and IoT applications. Its compatibility with NMEA 2000 networks and Signal K platforms enhances its utility in modern marine systems, allowing easy integration with other onboard electronics and data-sharing capabilities.
 ===== Prerequisites =====
@@ Line 149: / Line 151: @@
 ==== Step 9: Verify the Setup ====
-Navigate to http://<raspberry-pi-ip>:3000 in your web browser.
+Navigate to your web browser.
-Check the Data Browser to ensure you're receiving data from both the MacArthur HAT and the NMEA 2000 network.
+  * Check the Data Browser to ensure you receive data from the MacArthur HAT and the NMEA 2000 network.
-Congratulations! You have successfully installed and configured a MacArthur HAT on a Raspberry Pi, added an NMEA 2000 network interface, and connected it to a Signal K application.
+  * Congratulations! You have successfully installed and configured a MacArthur HAT on a Raspberry Pi, added an NMEA 2000 network interface, and connected it to a Signal K application.
-step 2