Differences

This shows you the differences between two versions of the page.

--- opencpn_build_manual [2024/11/25 06:22] – admin
+++ opencpn_build_manual [2025/01/13 08:51] (current) – admin
@@ Line 1: / Line 1: @@
-====== DIY Guide for Building Your Raspberry Pi Navigation System ======
+====== HowTo: Build a Raspberry Pi Navigation System ======
-{{:firefly_20241118061720.png?200 |}} ==== Assembly Manual for Open Ocean DIY Chart Plotter KIT ====
+{{:wegmat.png?200 |{{:firefly_20241118061720.png?200 |}}Assembly Manual for Open Ocean DIY Chart Plotter KIT
@@ Line 23: / Line 23: @@
 Wireless Keyboard/Mouse
   Screws and wires for assembly
+  {{:aed3836c-e61d-4cf8-ac55-ca54e3c0c059.png?200|}}
 Edit
 . Gather Additional Tools
@@ Line 33: / Line 36: @@
 . Assemble the Hardware
-    A. Open the case and ensure the Raspberry Pi fits snugly inside.
+    A. Open the case and ensure the Raspberry Pi fits snugly inside the faceplate provided with the kit.
+    B. Attach the support bars to the sides of the case on the marks.  Be sure to allow enough depth for the faceplate to be flush.
-  Align GPIO pins and ports with the case cutouts.
+  Align GPIO pins and ports with the case cutouts. (for
     B. Connect Power Supply